Moneris Pinpad Setup

Enter:

• A description. We suggest the pin pad type, ID and location
• The merchant account to associate with this pin pad
• The pin pad number provided by your merchant provider
• Timeout - 30 seconds should be enough
• Pinpad URL is ippos.moneris.com/Terminal
• Port should be 443

Once you save the EMV device record, you can try Pairing with actual the device. You will be asked to enter the pair code that you see on the device to associate it with this record. After pairing, the device should go to a ready mode.

If you cannot pair with the device, contact Moneris to make sure the device is on cloud setting.

	After the device is set up, you must associate the EMV device to a computers hardware setup
	You will also need to provide some Merchant Settings from Moneris that activate your pinpad machines If you do not, you may see a message like the one to the right if you try pair the devices.
	Only Moneris cloud setup is supported (direct connection is not). This currently means only the P400 pin pad devices on cloud setting can be used. Please contact moneris to see if yours is compatible or needs replaced with a P400.
	Pin Pads are settled during end of day. if you receive any message about an imbalance on a pin pad, please refer to the Moneris Pin Pad End Of Day troubleshooting tips.