Setting Up TCP/IP for Mac OSX

For More information on network setup in Mac OSX, please refer to Apple's Website or internal Mac Help.

If you are unsure if you should be changing these settings, please contact your Network Administrator or your network's Technical Support. Theatre Manager Support does not cover network setup.

1. Begin by going into your Apple, and System Preferences
   
   
   
2. Click on Network, select your active connection on the left, and then click the Advanced Button.
   
   
   
3. In the TCP/IP tab, if you are set for DHCP, you will see your IP Address listed under IPv4 Address (in the example, the IP is 10.0.1.2)
   
   

   **Not recommended without consulting your IT Department** To change the IP of this machine, click the drop-down by Configure IPv4 to change between Manual or Using DHCP.

   
   
   
4. If you enter your IP manually, you can do so in this window
   
   
5. Click "OK' to exit back to Network Settings, and 'Apply' to apply your change.
   
   

To check a computer's IP address in Windows:

1. Go to Start > Programs > Accessories > Command Prompt
2. The Command Prompt window will open
3. Type ipconfig and hit Enter
4. You'll see a list of a few different addresses. The IPv4 address or simply the line that says "IP Address" (depending on the version of Windows) is the IP address of the machine.